Command and Processes Table - R

For more information on the terms 'Command', 'Process' and 'Macro Command', see Command Table Introduction.

These tables list all commands and processes available in all products. If your product has access to a command or process, the link on the left of the table takes you to a dedicated help file for more information. If no link appears, the function isn't available in your product.

Symbols used in this table:

A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.

X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).

A blue diamond indicates the module is an optional extra for the specified system.

For Macro commands, see here.

Commands - R

Process Name

Description

More Help

ramp-between-2-points

X

X

X

X

X

X

X

X

Make ramp connecting two points, according to supplied criteria.

ramp-by-three-points

X

X

X

X

X

X

X

X

Make ramp connecting three points, according to supplied criteria.

ramp-curve-fit

X

X

X

X

X

X

X

X

Modify string so that its end tangentially fits another string.

rapid-digitize-switch

Modify string so that its end tangentially fits another string.

Command Help

rectangle-from-center-to-corner

Draws a rectangle with a center point and a corner point selected interactively.

Command Help

rectangle-from-corner-to-corner

Draws a rectangle with a center point and a corner point selected interactively.

Command Help

redo-last-undo

Redo the previous undo command

Command Help

redraw-display

Redraws currently displayed object overlays.

Command Help

redraw-strings-in-order

Redraw string data according to a nominated numeric data column from which a sequence of drawing can be determined.

Command Help

reduce-points

Reduces the number of points in a string by the percentage set using the reduction-percentage command.

Command Help

reduction-percentage

Used in conjunction with the reduce-points command. Specifies the percentage reduction.

Command Help

remove-string-crossovers

Removes string crossovers in the current view plane.

Command Help

rename-drillhole

Interactively rename drill holes.

Command Help

reposition-sirotiff

Reposition a SiroTIFFimage  in the XYZ axes

Command Help

reset-georeferencing

X

X

X

X

X

X

X

X

Reset the current map georeferencing, returning the map to local coordinates.

resolve-string-points

Resolves points from one string onto those of another string within a defined tolerance.

Command Help

results-annotation

X

X

X

X

X

X

X

Annotate perimeters with corresponding field value in results file.

reverse-string

Reverses the order of points for selected strings.

Command Help

reverse-view

Reverse the current view direction.

Command Help

rings-edit-hole-params-switch

X

X

X

X

X

X

X

X

Toggle the display of the Drillhole Parameters dialog on drillhole creation.

rings-move-drill

X

X

X

X

X

X

X

X

Reposition the drill relative to the rig center.

rings-move-rig

X

X

X

X

X

X

X

X

Move the drill rig within the drill drift outline.

rings-position-rig

X

X

X

X

X

X

X

X

Determine if a drill rig can be brought into position in plan view.

rings-rig-reversed-switch

X

X

X

X

X

X

X

X

Toggles rig direction.

rings-save-design-planes

X

X

X

X

X

X

X

X

Create a Section Definition file from strings intersecting the view plane.

rings-toe-snap-to-design-switch

X

X

X

X

X

X

X

X

Toggles the use of snapping when positioning hole toe positions.

rings-toe-spacing-marker-switch

X

X

X

X

X

X

X

X

Creates an intersecting road layout from two intersecting strings.

road-berm-offset-percentage

X

X

X

X

X

Berm tapering will gradually reduce the width of the berm where the berm meets the road in an open pit design.

road-berm-taper-switch

X

X

X

X

X

Toggles the use of tapering in road berm creation.

road-design-string-pair

X

X

X

X

X

Generate a road design string between two existing contours.

road-design-string-single

X

X

X

X

X

Generate a road design string from an existing perimeter.

road-outline-intersection

X

X

X

X

X

X

X

X

Creates an intersecting road layout from two intersecting strings.

road-tester

X

X

X

X

X

X

Interactively experiment with different road layouts over a pit wireframe, using the Ramp Layout tool.

Command Help

road-string-colour

X

X

X

X

X

Set colour for road strings in open pit design.

roof-string-colour

X

X

X

X

X

X

Set color for roof strings in underground mine design.

rotate-string

Rotates a string interactively about a fixed anchor point.

Command Help

rotate-string-by-angle

Rotates the selected string(s) in the current view plane, about a selected point, by a specified angle.

Command Help

rotate-string-to-azimuth

Rotates a string about a selected point in the current view plane to a specified azimuth.

Command Help

rotate-wireframe

X

Interactive command for rotating a wireframe object using defined rotation angle and rotation point settings.

Command Help

Processes - R

Process Name

Description

More Help

RANK

Ranks values of a given numeric or alphanumeric field in a file.

Process Help

REBLOCK

X

This command re-blocks a block model by user specification of new X, Y and Z parent cell sizes. The origin of the model remains unchanged.

Process Help

RECBLKST

X

X

X

X

X

Compare the volumes defined by outlines between an initial and final topography.

Process Help

RECCOP

Copy a group of records from one file to another.

Process Help

RECMODEL

X

Compare the volumes defined by two model key fields.

Process Help

RECMODWF

X

Compare the volumes defined by wireframe solids with the contents of cells classified by keyfields in the model file.

Process Help

REGMOD

X

Produces a regular cell model from any type of Datamine ore body block model.

Process Help

REGMOW

Produces a regular cell model for pit optimization.

Process Help

RENAME

Renames a Datamine file in the project.

Process Help

REPORK

General tabulating report generator with provision for separate keyfield sections.

Process Help

REPORT

Generates a tabulation to your own format requirements.

Process Help

RESCAT

Reserve Category Modeling.

Process Help

RESTRI

Performs a relational restriction operation.

Process Help

RNLM

X

X

X

X

X

X

R - mode non linear mapping groups together elements using the angular distances calculated from the Pearsson correlation coefficient matrix.

ROTORDER

X

Converts rotation axes and angles to a specified rotation order.

Process Help